To ensure that Windows 10 stays protected from ransomware, Microsoft has allowed Secure Boot support to operate on top of UEFI. Safe Boot means that when your PC boots, it only uses hardware that is trusted by the vendor. However, you will need to disable Stable Boot in Windows 10 several times due toSE any hardware misconfiguration. So, in this guide, you are going to learn how to disable UEFI secure boot on an HP laptop in Windows 10.
If you’re curious what UEFI is, then it extends to the Unified Extensible Firmware Interface which is the next version of the common BIOS. It’s stable, it can carry more data, way faster than BIOS, and it’s almost like a tiny operating system running on top of a PC firmware, and it can do a lot more than a BIOS. The best thing is that the OEM will upgrade it through Windows Update.
It’s because of UEFI, Windows 10 has security features like Secure Boot, Windows Defender System Protect, Windows Defender Credential Guard, and Windows Defender Exploit Guard. This is a list of the features that you get:
- Faster boot and resume times.
- It easily supports large hard drives (more than 2 terabytes) and drives with more than four partitions.
- Support for multicast deployment, which allows PC manufacturers to broadcast a PC image that can be received by multiple PCs without overwhelming the network or image server.
- Support for UEFI firmware drivers, applications, and option ROMs.
What is the Secure Boot?
Simply put, disabling the secure boot option would not preclude Windows from booting two operating systems, from booting from an external drive, or from booting Windows in any particular manner to provide protection for Windows against unwanted machines. Safe booting began with Windows 8 and later versions including Windows 8.1 or Windows 10 when Windows started running UEFI instead of BIOS.
Here are some of the requirements that will be enabled on your PC after you disable the Windows stable boot option:
- You will boot Windows from an external computer like a USB or CD on your PC.
- Dual OS operating Windows of Debian, Ubuntu, or Fedora.
- Windows startup using Windows Login Recovery Software
- Running the previous versions of Windows and so on.
So, without further ado, here’s how to disable the UEFI secure boot on an HP laptop in Windows 10:
Method 1. Disable UEFI Secure Boot on HP Laptop from BIOS
In the first method, you can easily disable the secure boot option from the BIOS setup on an HP laptop.
Step 1. Restart your HP laptop and then press the F10 key on your keyboard to go to BIOS.
Step 2. Go to the System Configuration tab and select Boot Options using the arrow keys and press enter.
Step 3. Go to the Secure Boot option and press enter.
Step 4. Now, make sure it’s disabled and press enter.
Step 5. Now, as you can see in the screenshot below that the secure boot option is disabled. Press F10 to save and exit.
Method 2. Disable Secure Boot on HP Laptop from Settings
There’s also an alternative way to disable the secure boot on the HP laptop from the Windows Settings app.
- Press the Win key + I to open Windows Settings.
- Select Update & Security.
- Select the Recovery option on the left-hand side and select Restart now.
- Select Troubleshoot.
- Select the Advanced options.
- Select UEFI Firmware Settings and press enter and then select Restart.
- On start up boot select F10 to go BIOS Setup and then go to > System Configuration > Boot Options > Secure Boot > Disable it.
After you disable Secure Boot and update other software and hardware, it can be impossible to re-activate Secure Boot without returning your PC to the factory state. Even, be careful when adjusting your BIOS settings. The BIOS menu is intended for experienced users, and you can adjust the settings that could keep your PC from starting correctly. Make sure to follow the directions of the maker precisely.
This is how you can disable the UEFI secure boot option on your HP laptop in Windows 10. If you want to re-enable the secure boot option on your PC, follow the same steps as stated above and change the secure boot option from Disabled to Allowed in the BIOS protection settings.