Do you want to eject water from your iPhone 14 series, iPhone 13 series, iPhone 12, or iPhone 12 speaker? This post will teach you how to get water out of an iPhone speaker using a shortcut.
Modern iPhones are water-resistant, but unlike Apple Watch, there is no approved mechanism to remove water from the speaker grills. If the water is not ejected, it not only muffles audio but also causes significant damage.
It would be a nightmare if water got inside your iPhone. Despite having an IP rating of some kind (iPhone 7 and beyond, including the iPhone 14 series), modern iPhones are not waterproof. Additionally, getting any water on or inside an older iPhone can be quite damaging.
The speaker or lightning port of the iPhone frequently becomes clogged with water, which muffles sound. It is more challenging to dry out a camera lens that has water or moisture inside of it, though, under particular circumstances.
Prior to starting:
- If you recently spilled or splashed water on your iPhone, be sure to wipe it down with a soft, dry towel.
- Clean the damaged area with fresh water if you spilled anything other than water (tea, coffee, juice, wine, etc.). Make that the water pressure in the tap is not excessive.
- Make sure no accessories, including earbuds or the Lightning cord, are plugged in.
- Don’t use your wet iPhone’s charging port. For the next five hours, don’t charge!
- Make sure nothing enters the tiny speaker grills or the Lightning connector to dry the water within.
- A wet iPhone’s SIM tray should not be opened.
What You Will Learn Here:
How to Get Water Out of iPhone Speaker using Water Eject Shortcut
As many of you may know, the Apple Watch has a useful method for clearing water from the speaker grilles. It works well and lets you play noises to force water out of the speaker. Unexpectedly, the iPhone lacks any such built-in techniques. To eject water out of your iPhone speaker, you may still construct one for yourself or utilize a Siri shortcut made by another iPhone user. The steps are as follows:
1. On your iPhone, you must first allow the installation of untrusted shortcuts if you’re running iOS 14 or before.
- Go to Settings.
- Tap Shortcuts.
- Toggle on the Allow Untrusted Shortcuts option. If required, enter your passcode to confirm the action.
2. Add the Water Eject shortcut using this link.
3. Tap Add Shortcut.
4. After that, tap the Water Eject shortcut.
5. Tap Begin Water Ejection. Make sure the iPhone volume is set to max.
Note: To get better results, tilt your iPhone’s speaker downward so that gravity can work in your favor. Additionally, avoid utilizing the shortcut when using headphones or AirPods.
That’s all. This is how you can get water out of an iPhone speaker using the Water Eject shortcut.
How to Resize an Image on iPhone and iPad Without Third-party Apps