7 Best Apple Watch Ultra Tips and Tricks

What if I say Apple Watch Ultra is the best smartwatch in the world right now? Am I wrong? of course not. This guide will show the best 7 Apple Watch Ultra tips and tricks to master.

The high-end Apple Watch Ultra, which has been in development for years, was unveiled by Apple in September 2022. The Apple Watch Ultra is designed to compete with more costly fitness-focused smartwatches from manufacturers like Garmin and is targeted at athletes and sports fans who need their devices to perform better in specialized activities and have longer battery lives.

The 49mm Apple Watch Ultra, which is 4mm more considerable than the 45mm Apple Watch Series 8 that it is being marketed alongside, is the biggest Apple Watch to date, according to Apple, and was created for endurance, exploration, and adventure.

With its lightweight aerospace-grade titanium casing, flat sapphire crystal face, bigger diameter, and deeper grooved Digital Crown, housing for the side button, and additional physical button on the left side known as the Action button, the Apple Watch Ultra represents the first overhaul in years. For more detailed information kindly visit this website.

Features:

• 49mm case
• Flat sapphire front crystal
• 36-hour battery life
• Dual-frequency GPS
• Action button
• Depth app for divers
• All Series 8 features

7 Best Apple Watch Ultra Tips and Tricks

Here are the 5 best Apple Watch Ultra Tips:

1. Activate Wayfinder Night Mode: Apple Watch Ultra

The Apple Watch Ultra features a special “Wayfinder” face with a clock display that doubles as a compass and space for up to eight complications. The built-in night mode on the Wayfinder face makes it red for enhanced visibility at night. The Digital Crown may be turned to enter night mode.

• Swipe to the new Wayfinder watch face, which was created especially for the Apple Watch Ultra, if it isn’t already active.
• Obtain Night Mode by turning the Digital Crown.
• Rotate the Digital Crown in the other way to turn it off.

Activate Wayfinder Night Mode: Apple Watch Ultra

2. Crash Detection

The Apple Watch Ultra can recognize a serious auto accident and inform emergency personnel thanks to updated motion sensors and a sophisticated sensor-fusion algorithm. The Apple Watch will check in with the user after detecting a crash and then call emergency services if there is no answer after 10 seconds. Also informed will be emergency contacts.

• Go to the Settings app.
• Tap SOS.
• Select Crash Detection and make sure it’s turned on.

Crash Detection

3. Siren

The Apple Watch Ultra has an 86-decibel emergency siren that may be used to alert others to a location in an emergency. The sound alternates between two patterns, one of which is a distress pattern and the other are the well-known SOS pattern.

• Press and hold the Action button on your Apple Watch Ultra
• Move the Siren slider to the right to start it.

Siren

4. Optimize Battery Charging

In order to delay full charging past 80% until you need to use it, Apple Watch Ultra employs on-device machine learning to understand your regular charging habits.

• Go to the Settings app.
• Tap Battery.
• Select Battery Health.
• Enable Optimized Charge Limit.

Optimize Battery Charging

5. Using the Depth App

A special Depth app is included with the Apple Watch Ultra for activities like snorkeling underwater. Use it as follows.
Depth is not a diving computer, as stated on Apple’s support website. It doesn’t offer the gas analysis, decompression stop information, or other information that scuba divers require.

The Apple Watch Ultra’s depth sensor, on the other hand, may be used with third-party apps that serve as dive computers for recreational scuba diving. It complies with EN13319, diving computers, and gauges standard that is widely acknowledged.

The Depth app displays the current time, depth, most depth achieved during the session, and water temperature. Apple Watch Ultra’s depth sensor has a plus or minus 1-meter accuracy range. It can operate down to a maximum depth of 40 meters or 130 feet. Below this depth, the Apple Watch Ultra screen may turn yellow, and some features could become unusable or stop operating altogether.

• Open the Settings app.
• Tap General. Here, you will see the Auto-Launch section.
• Now, toggle on the Auto-Launch App switch under the WHEN SUBMERGED label.

Using the Depth App

6. Customize the Action Button

On the left side of the casing of the Apple Watch Ultra is a programmable Action button that may be used for a number of tasks. 

The Action Button on the Apple Watch Ultra may be configured to carry out a variety of tasks in addition to sounding the Siren, providing instant access to them without requiring you to tap through numerous panels.

You will be asked to choose one of the following functions to attach to your Apple Watch Ultra when you initially set it up:

• Workout
• Stopwatch
• Waypoint
• Backtrack
• Dive
• Flashlight
• Shortcut
• None

Here’s how to customize the action button:

• Go to the Settings app on your Apple Watch Ultra.
• Scroll down and then select Action Button.
• Tap on Action and select any action that you want to use.

Customize the Action Button

7. Take Screenshot on Apple Watch Ultra

• Make sure that your Apple Watch Ultra is connected to your iphone. 
• Open the Watch Application on your iPhone.
• Tap General.
• Scroll down and turn on Enable Screenshots.
• On Apple Watch Ultra, press the side button and the “Digital Crown” wheel at the same time to take the screenshot and release both buttons at the same time.

That’s it. These were the 7 best Apple Watch Ultra Tips and tricks to make more out of it.

Read Next

How to Screen Mirror Apple Watch to iPhone

Apple Watch Series 8 Tips and Tricks: Try These 10 Features

How to Get a 60-Hour Battery on Apple Watch Ultra